DF83V coffee grinder – user manual

Warranty and service

Consumers have a 2-year legal guarantee of conformity from the day they receive the product; businesses get a 1-year warranty. During this period we provide:

1. Free repair of a faulty grinder;
2. Free replacement of defective parts. Normal wear of the burrs is not a defect;
3. Any other rights that the law of your country gives you.

For warranty service, write to contact@coffeegeeks.eu. Please keep the receipt or invoice and the delivery note.

Exclusions

The warranty does not cover:

1. 1. Damage caused by accessories not made or approved by us;
2. 2. Damage caused by dismantling the grinder without authorisation;
3. 3. Damage caused by use that does not follow this manual;
4. 4. A product obtained by unlawful means;
5. 5. Damage caused by force majeure;
6. 6. A product repaired by unauthorised persons without contacting us or one of our authorised dealers.

Intended use

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Instructions for operating the grinder and for cleaning the parts that come into contact with food are given under “Operating instructions” and “Cleaning”.

Safety precautions

• Do not modify the grinder;
• Do not place the grinder near an open flame or a heat source;
• Do not wash the grinder with water, inside or out;
• Do not use the grinder outdoors or in direct sunlight;
• Do not grind anything other than coffee beans;
• Do not let children operate, touch or climb on the grinder;
• Do not squeeze, pull, knot or damage the power cord;
• If the power cord is damaged, it must be replaced by the manufacturer or a service centre to avoid the risk of electric shock;
• Unplug the grinder before replacing any parts;
• Take care when removing the burrs and cleaning the grinder.

Specifications

Parts

1. 1. LidBlack walnut
2. 2. BellowsFood-grade silicone
3. 3. Anti-popcorn lidAnodised 6063 aluminium alloy
4. 4. HopperAnodised 6063 aluminium alloy
5. 5. Indicator collarAnodised 6063 aluminium alloy; twists off
6. 6. Adjustment dialAnodised 6063 aluminium alloy; easy to reset to zero after a burr change
7. 7. ChuteAnodised 6063 aluminium alloy; held by a magnet, quick to remove
8. 8. Dosing cupAnodised 6063 aluminium alloy; a magnet holds it in place
9. 9. BaseAnodised 6063 aluminium alloy
10. 10. BodyAnodised 6063 aluminium alloy
11. 11. StandAnodised 6063 aluminium alloy
12. 12. Speed knobShows the speed, 300–1600 rpm
13. 13. OutletWith a built-in plasma generator to reduce static
14. 14. Start buttonStarts and stops the motor
15. 15. Power switchSwitches the power on and off

Accessories

• 1. Dosing cupAnodised 6063 aluminium alloy
• 2. BellowsWith lid; a gentle press blows air through and reduces retained grounds
• 3. Allen keyFor removing the hopper and the adjustment dial
• 4. Cleaning brushFor the grinder and your workspace

Grind adjustment

Stepless adjustment to any grind size you need.

1. The adjustment dial has 90 settings, 3° apart;
2. turn it clockwise for a finer grind;
3. anticlockwise for a coarser one.

Important: only adjust when there are no beans in the grinder and while the motor is running.

DF83V coffee grinder · User manual

Motor speed

1. The speed range is 300 to 1600 rpm;
2. Each step you turn the speed knob (12) clockwise adds 100 rpm; each step anticlockwise takes 100 rpm off;
3. You can change the speed before or after starting the motor.

If the motor stalls

1. 1. Switch the grinder off with the power switch (15).
2. 2. Unplug it, remove the lid (1) and pour out any beans left inside.
3. 3. Plug it back in, set 1600 rpm, adjust to a coarser grind and switch the grinder back on.

Operating instructions

1. STEP1Plug the grinder in and turn on the power switch (15). The speed display lights up.
2. STEP2Set the speed with the speed knob (12).
3. STEP3Open the lid (1), pour the beans into the hopper (4) and press the start button (14) to start the motor.
4. STEP4When the beans have been ground, press the bellows (2) to blow out leftover grounds. Do not grind for more than 45 seconds at a time.
5. STEP5After grinding, press the bellows once more to blow out any coffee that is left.

Warning: do not put anything other than coffee beans in the grinder, and never put your hand inside it while it is plugged in or running. Doing so may cause serious injury.

Cleaning

1. 1. Start the motor and use the bellows (2) to blow leftover grounds out of the chamber. Then switch the grinder off.
2. 2. Unplug the grinder.
3. 3. Remove the adjustment dial (6) by turning it anticlockwise.
4. 4. Then remove the indicator collar (5) by turning it anticlockwise.
5. 5. Pull out the front burr with its carrier.
6. 6. Clean both burrs and the chamber with a dry brush or a handheld vacuum cleaner.
7. 7. Remove the magnetic chute (7) and clean it thoroughly with a dry brush.
8. 8. Clean the outlet (13) with a dry brush. Do not touch it with your fingers: the plasma generator probe is inside.
9. 9. Reassemble everything in reverse order.