DF64V – user manual

Warranty and service

Consumers have a 2-year legal guarantee of conformity from the day they receive the product; businesses get a 1-year warranty. During this period we provide:

Free repair of a faulty grinder;
Free replacement of defective parts. Normal wear of the burrs is not a defect;
Any other rights that the law of your country gives you.

For warranty service, write to contact@coffeegeeks.eu. Please keep the receipt or invoice and the delivery note.

Exclusions

The warranty does not cover:

1. Damage caused by accessories not made or approved by us;
2. Damage caused by dismantling the grinder without authorisation;
3. Damage caused by use that does not follow this manual;
4. A product obtained by unlawful means;
5. Damage caused by force majeure;
6. A product repaired by unauthorised persons without contacting us or one of our authorised dealers.

Intended use

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Instructions for operating the grinder and for cleaning the parts that come into contact with food are given under “Operating instructions” and “Cleaning”.

This appliance is intended to be used in household and similar applications such as:

staff kitchen areas in shops, offices and other working environments;
farm houses;
by clients in hotels, motels and other residential type environments;
bed and breakfast type environments.

Do not dispose of this appliance with household waste. Take it to a collection point for waste electrical and electronic equipment.

Importer: SilSarv OOD, VAT No. BG207226406
ul. Petko D. Petkov 2, et. 3, ap. 18, Sofia, Bulgaria
contact@coffeegeeks.eu · coffeegeeks.eu

Made in China.

Coffee grinder

DF64V

User
manual

Gen 3 · variable speed

Please read this manual before using the grinder and keep it for future reference.

Safety precautions

Do not modify the grinder;
Do not place the grinder near an open flame or a heat source;
Do not wash the grinder with water, inside or out;
Do not use the grinder outdoors or in direct sunlight;
Do not grind anything other than coffee beans;
Do not let children operate, touch or climb on the grinder;
Do not squeeze, pull, knot or damage the power cord;
If the power cord is damaged, it must be replaced by the manufacturer or a service centre to avoid the risk of electric shock;
Unplug the grinder before replacing any parts;
Take care when removing the burrs and cleaning the grinder.

Specifications

Product	Coffee grinder
Model	DF64V
Product size	L200 × W100 × H345 mm
Carton size	L310 × W180 × H415 mm
Net weight	3.8 kg
Gross weight	5.0 kg
Rated power	400 W
Speed	800–1800 rpm
Burrs	flat, 64 mm
Grinder capacity	30 g
Bellows capacity	30 g

Parts

1. LidWood
2. BellowsFood-grade silicone
3. Anti-popcorn insertAnodised aluminium alloy
4. Adjustment discAnodised aluminium alloy
5. Indicator ringAnodised aluminium alloy
6. Dial scale ringAnodised aluminium alloy
7. Movable declumperStainless steel; press it to knock out leftover grounds
8. Outlet chuteAnodised aluminium alloy; removable, held by a magnet, easy to clean
9. Plasma generatorThe probe sits outside the chute for a stronger anti-static effect
10. BodyAnodised aluminium alloy
11. DisplayShows the speed; turn it to change the speed
12. Power buttonStarts and stops the motor
13. Dosing cupAnodised aluminium alloy
14. Cup standWood
15. BaseAnodised aluminium alloy

Accessories

1. BellowsWith lid; a gentle press blows air through and reduces retained grounds
2. Dosing cupAnodised 6063 aluminium alloy
3. Cup standWood
4. Cleaning brushFor the grinder and your workspace
5. Allen keySize 2.0; for the screw on the indicator ring

Grind adjustment

Stepless adjustment to any grind size you need.

Important: only adjust when there are no beans in the grinder or while the motor is running.

Grind size by brew method

Motor speed

The speed range is 800 to 1800 rpm;
Each step you turn the display (11) clockwise adds 100 rpm; each step anticlockwise takes 100 rpm off;
You can change the speed before or after starting the motor.

Recommended grind setting and speed:

espresso: setting 10–30, 1000–1800 rpm;
pour-over: setting 40–60, 800–1000 rpm.

When you plug the grinder in, the display shows in turn:

Operating instructions

STEP1Plug the grinder in. The display (11) on the left lights up and shows the current speed.
STEP2Set the speed you need and press the button (12) on the right to start the motor.
STEP3Once the motor is running, open the lid (1) and pour in the beans.
STEP4When the beans have been ground, press the metal declumper (7) to knock out the grounds. Then press the bellows (1, 2) to blow leftover grounds out of the chamber, and tap the chute (8). Do not grind for more than 45 seconds at a time.
STEP5Press the button again to stop the motor. Remove the chute (8) and clean it with a brush.

Warning: do not put anything other than coffee beans in the grinder, and never put your hand inside it while it is plugged in or running. Doing so may cause serious injury.

Cleaning

1. Plug the grinder in and start the motor with the button (12). Press the declumper (7) and the bellows (1, 2), and tap the chute (8) to clear leftover grounds. Then stop the motor and unplug the grinder.
2. Remove the chute (8) and clean it with a brush.
3. Turn the dial scale ring (6) to lift off the whole upper assembly (3, 4, 5, 6) in one piece. Do not separate parts 3, 4, 5 and 6 from one another.
4. Remove the upper burr holder and clean the burrs and the chamber with a brush.
5. Reassemble everything in reverse order.

Burr zero point

After every cleaning, before you start the motor, set the burrs’ zero point:

STEP1Turn the dial scale ring (6) clockwise until it stops and check that “0” on the scale lines up with the chute (8).
STEP2Remove the indicator ring (5). Turn the adjustment disc (4) clockwise very slowly until you hear the burrs touch, then turn it back anticlockwise by 1–2 marks.
STEP3Refit the indicator ring (5) with its white mark lined up with “0” on the scale (6), and tighten its screw with the Allen key.